Innovation
We supply the automotive industry with high quality range of products and services. We are both a development partner and full service supplier.
Innovation
Integrated support for Shock Absorber.
Structural attachment of both sides of chassis / body and white.
Structural component under side structure.
Undercover of the engine, holds the oil reserve of the engine.
External cover of the camshaft system.
The front engine cover holds the front crankshaft seal and protects the timing chains.
Oil distribution in a variable camshaft system.
It ensures that the coolant keeps moving through the engine block, hoses and radiator, and maintains an optimum operating temperature
It sucks oil up from the oil pan and forces it around oilways in the engine, before the oil drops back into the sump and is recirculated.
It facilitates the transmission through engine hydraulic pressure, protects a converter that delivers power and internal gears.
Oil piston that is activated during the start stop sequence.
Protects the exposed shaft end and helps avoid accidents.
Housing that holds the differential mechanism.
Case of the electrical motor.
Transmission redactor between electrical motor and drive unit.
Structural element of the battery.
Holds the mechanical elements of the steering system (Pinion and Rack).
Collapsible element in the steering system during a crash event.
Cover on rocker arms in an internal combustion engine.
Compressor housing that converts the low-pressure air stream into a high-pressure, low-velocity air stream through a process called diffusion.
Part of an engine that supplies the fuel/air mixture to the cylinders.
Pump that takes water from the radiator and moves it through the motor back to the radiator, where the cycle begins again. It makes sure the engine remains at a constant temperature.
Connector for a water in/out of the engine.
Element that connects water to two sides of the engine.
Gehäuse des Differentialsystems.
The cover of the housing that holds the differential mechanism.
It distributes high chassis loads over a wide area of relatively thin metal sheets and isolates vibration and harshness from the rest of the body. Subframes typically carry the axle, lower control arms and, in the case of the front axle, the steering rack.
Upper and lower covers of the auto A-B-C Pillars.
Upper and lower covers of the auto A-B-C Pillars.
Upper and lower covers of the auto A-B-C Pillars.
A group of parts that cover the metal inside of the trunk.
Compartment in the instrument panel on the passengers side.
Decorative elements in the instrumental panel (wood, piano black, etc.).
Element that contains all the instrumentation of the car such as speedometer, climatronic, radio, etc.
System that directs the air to the passengers.
Attached to the roof of the vehicle and holds various displays, controls, and convenience features accessible to the occupants of the vehicle.
System that integrates the shift lever, manual brake and service box.
Plastic elements necessary in a seat.
Plastic elements necessary in a seat.
Element that holds all the instrumentation of the car such as: speedometer, etc.
Plastic reservoir mounted in the engine bay that stores the coolant for the engine.
Tank used to store windshield washer fluid in order to clean the windshield polluted with dirt and other debris.
They work together to transfer heat from the coolant to the air. The shroud focuses the airflow through the radiator and across the engine. The shroud also acts like a funnel, pulling air through the entire radiator.
Regulates the temperature of the flow coolant.
Part of an engine that supplies the fuel/air mixture to the cylinders.
Collects the water in the windshield.
Cover to protect underneath the bodywork.
Plastic cover that avoids water and dust insertion in the chassis from the wheels.
Plastic molding located around the glass inside the car.
Plastic ducts to guide the air.
-
Shock Tower
-
Cross Member
-
Longitudinal Member
-
Oil Pan
-
Cam Cover
-
Front Cover
-
Variable Timing Control Cover
-
Water Pump
-
Oil Pump
-
Converter Housing
-
Start Stop Set
-
End Cover
-
Differential Carrier
-
Stator Housing
-
Gear Case
-
Battery Bracket
-
Rack and Pinion Housing
-
Column Lowercase
-
Cam Cover
-
Compressor Housing
-
Intake Manifold
-
Water Pump
-
Water Inlet / Outlet
-
Water Crossover
-
Differential Carrier
-
Differential Cover
-
Suspension Subframes
-
Pillar A
-
Pillar B
-
Pillar C
-
Trunk and Backdoor Trims
-
Glovebox
-
Decorative Parts
-
Air Vents Assembly
-
Upper Consoles
-
Center Console
-
Seat Part
-
Seat Parts
-
Meter Console Trim
-
Coolant Reservoir
-
Washer Reservoir
-
Fan and Shrouds
-
Thermo Housing
-
Intake Manifold
-
Cowltop
-
Undercovers
-
Fender Protector
-
Window Garnish
-
Air Guides
Innovation
We supply the automotive industry with high quality range of products and services. We are both a development partner and full service supplier.
Integrated support for Shock Absorber.
Structural attachment of both sides of chassis / body and white.
Structural component under side structure.
Undercover of the engine, holds the oil reserve of the engine.
External cover of the camshaft system.
The front engine cover holds the front crankshaft seal and protects the timing chains.
Oil distribution in a variable camshaft system.
It ensures that the coolant keeps moving through the engine block, hoses and radiator, and maintains an optimum operating temperature
It sucks oil up from the oil pan and forces it around oilways in the engine, before the oil drops back into the sump and is recirculated.
It facilitates the transmission through engine hydraulic pressure, protects a converter that delivers power and internal gears.
Oil piston that is activated during the start stop sequence.
Protects the exposed shaft end and helps avoid accidents.
Housing that holds the differential mechanism.
Case of the electrical motor.
Transmission redactor between electrical motor and drive unit.
Structural element of the battery.
Holds the mechanical elements of the steering system (Pinion and Rack).
Collapsible element in the steering system during a crash event.
Cover on rocker arms in an internal combustion engine.
Compressor housing that converts the low-pressure air stream into a high-pressure, low-velocity air stream through a process called diffusion.
Part of an engine that supplies the fuel/air mixture to the cylinders.
Pump that takes water from the radiator and moves it through the motor back to the radiator, where the cycle begins again. It makes sure the engine remains at a constant temperature.
Connector for a water in/out of the engine.
Element that connects water to two sides of the engine.
Gehäuse des Differentialsystems.
The cover of the housing that holds the differential mechanism.
It distributes high chassis loads over a wide area of relatively thin metal sheets and isolates vibration and harshness from the rest of the body. Subframes typically carry the axle, lower control arms and, in the case of the front axle, the steering rack.
Upper and lower covers of the auto A-B-C Pillars.
Upper and lower covers of the auto A-B-C Pillars.
Upper and lower covers of the auto A-B-C Pillars.
A group of parts that cover the metal inside of the trunk.
Compartment in the instrument panel on the passengers side.
Decorative elements in the instrumental panel (wood, piano black, etc.).
Element that contains all the instrumentation of the car such as speedometer, climatronic, radio, etc.
System that directs the air to the passengers.
Attached to the roof of the vehicle and holds various displays, controls, and convenience features accessible to the occupants of the vehicle.
System that integrates the shift lever, manual brake and service box.
Plastic elements necessary in a seat.
Plastic elements necessary in a seat.
Element that holds all the instrumentation of the car such as: speedometer, etc.
Plastic reservoir mounted in the engine bay that stores the coolant for the engine.
Tank used to store windshield washer fluid in order to clean the windshield polluted with dirt and other debris.
They work together to transfer heat from the coolant to the air. The shroud focuses the airflow through the radiator and across the engine. The shroud also acts like a funnel, pulling air through the entire radiator.
Regulates the temperature of the flow coolant.
Part of an engine that supplies the fuel/air mixture to the cylinders.
Collects the water in the windshield.
Cover to protect underneath the bodywork.
Plastic cover that avoids water and dust insertion in the chassis from the wheels.
Plastic molding located around the glass inside the car.
Plastic ducts to guide the air.
Integrated support for Shock Absorber.
Structural attachment of both sides of chassis / body and white.
Structural component under side structure.
Undercover of the engine, holds the oil reserve of the engine.
External cover of the camshaft system.
The front engine cover holds the front crankshaft seal and protects the timing chains.
Oil distribution in a variable camshaft system.
It ensures that the coolant keeps moving through the engine block, hoses and radiator, and maintains an optimum operating temperature
It sucks oil up from the oil pan and forces it around oilways in the engine, before the oil drops back into the sump and is recirculated.
It facilitates the transmission through engine hydraulic pressure, protects a converter that delivers power and internal gears.
Oil piston that is activated during the start stop sequence.
Protects the exposed shaft end and helps avoid accidents.
Housing that holds the differential mechanism.
Case of the electrical motor.
Transmission redactor between electrical motor and drive unit.
Structural element of the battery.
Holds the mechanical elements of the steering system (Pinion and Rack).
Collapsible element in the steering system during a crash event.
Cover on rocker arms in an internal combustion engine.
Compressor housing that converts the low-pressure air stream into a high-pressure, low-velocity air stream through a process called diffusion.
Part of an engine that supplies the fuel/air mixture to the cylinders.
Pump that takes water from the radiator and moves it through the motor back to the radiator, where the cycle begins again. It makes sure the engine remains at a constant temperature.
Connector for a water in/out of the engine.
Element that connects water to two sides of the engine.
Gehäuse des Differentialsystems.
The cover of the housing that holds the differential mechanism.
It distributes high chassis loads over a wide area of relatively thin metal sheets and isolates vibration and harshness from the rest of the body. Subframes typically carry the axle, lower control arms and, in the case of the front axle, the steering rack.
Upper and lower covers of the auto A-B-C Pillars.
Upper and lower covers of the auto A-B-C Pillars.
Upper and lower covers of the auto A-B-C Pillars.
A group of parts that cover the metal inside of the trunk.
Compartment in the instrument panel on the passengers side.
Decorative elements in the instrumental panel (wood, piano black, etc.).
Element that contains all the instrumentation of the car such as speedometer, climatronic, radio, etc.
System that directs the air to the passengers.
Attached to the roof of the vehicle and holds various displays, controls, and convenience features accessible to the occupants of the vehicle.
System that integrates the shift lever, manual brake and service box.
Plastic elements necessary in a seat.
Plastic elements necessary in a seat.
Element that holds all the instrumentation of the car such as: speedometer, etc.
Plastic reservoir mounted in the engine bay that stores the coolant for the engine.
Tank used to store windshield washer fluid in order to clean the windshield polluted with dirt and other debris.
They work together to transfer heat from the coolant to the air. The shroud focuses the airflow through the radiator and across the engine. The shroud also acts like a funnel, pulling air through the entire radiator.
Regulates the temperature of the flow coolant.
Part of an engine that supplies the fuel/air mixture to the cylinders.
Collects the water in the windshield.
Cover to protect underneath the bodywork.
Plastic cover that avoids water and dust insertion in the chassis from the wheels.
Plastic molding located around the glass inside the car.
Plastic ducts to guide the air.
-
Shock Tower
-
Cross Member
-
Longitudinal Member
-
Oil Pan
-
Cam Cover
-
Front Cover
-
Variable Timing Control Cover
-
Water Pump
-
Oil Pump
-
Converter Housing
-
Start Stop Set
-
End Cover
-
Differential Carrier
-
Stator Housing
-
Gear Case
-
Battery Bracket
-
Rack and Pinion Housing
-
Column Lowercase
-
Cam Cover
-
Compressor Housing
-
Intake Manifold
-
Water Pump
-
Water Inlet / Outlet
-
Water Crossover
-
Differential Carrier
-
Differential Cover
-
Suspension Subframes
-
Pillar A
-
Pillar B
-
Pillar C
-
Trunk and Backdoor Trims
-
Glovebox
-
Decorative Parts
-
Air Vents Assembly
-
Upper Consoles
-
Center Console
-
Seat Part
-
Seat Parts
-
Meter Console Trim
-
Coolant Reservoir
-
Washer Reservoir
-
Fan and Shrouds
-
Thermo Housing
-
Intake Manifold
-
Cowltop
-
Undercovers
-
Fender Protector
-
Window Garnish
-
Air Guides
Aluminum High Pressure Die Casting Business Unit
We are a reliable partner for the sustainable mobility transformation, which requires not only mastering our processes, but also investing in the best technology, developing the right skills, and potentiating the best in our talented people. Bocar group approaches innovation by taking into consideration our customer needs and the relentlessly seeking for better ways to do everything we do. To listen carefully and provide the right solutions. We participate actively in the technology transformation of the industry by making sure we make the right assessments, use the best technology, and put the best hands on. We have a strong commitment to our environment and communities. Our engagement goes through the full value chain and we actively help our customers achieve their targets in light weighting and performance. We are a full-service supplier that invests in R&D, in addition to investing in the entire process from product development to mass production; we support and promote a circular economy that contributes to the reduction of CO2 emissions.
Aluminum Semi Permanent Mold Business Unit
We are a reliable partner for the sustainable mobility transformation, which requires not only mastering our processes, but also investing in the best technology, developing the right skills, and potentiating the best in our talented people. Bocar group approaches innovation by taking into consideration our customer needs and the relentlessly seeking for better ways to do everything we do. To listen carefully and provide the right solutions. We participate actively in the technology transformation of the industry by making sure we make the right assessments, use the best technology, and put the best hands on. We have a strong commitment to our environment and communities. Our engagement goes through the full value chain and we actively help our customers achieve their targets in light weighting and performance. We are a full-service supplier that invests in R&D, in addition to investing in the entire process from product development to mass production; we support and promote a circular economy that contributes to the reduction of CO2 emissions.
Plastics Business Unit
We are a reliable partner for the sustainable mobility transformation, which requires not only mastering our processes, but also investing in the best technology, developing the right skills, and potentiating the best in our talented people. Bocar group approaches innovation by taking into consideration our customer needs and the relentlessly seeking for better ways to do everything we do. To listen carefully and provide the right solutions. We participate actively in the technology transformation of the industry by making sure we make the right assessments, use the best technology, and put the best hands on. We have a strong commitment to our environment and communities. Our engagement goes through the full value chain and we actively help our customers achieve their targets in light weighting and performance. We are a full-service supplier that invests in R&D, in addition to investing in the entire process from product development to mass production; we support and promote a circular economy that contributes to the reduction of CO2 emissions.
Aluminum High Pressure Die Casting Business Unit
We are a reliable partner for the sustainable mobility transformation, which requires not only mastering our processes, but also investing in the best technology, developing the right skills, and potentiating the best in our talented people. Bocar group approaches innovation by taking into consideration our customer needs and the relentlessly seeking for better ways to do everything we do. To listen carefully and provide the right solutions. We participate actively in the technology transformation of the industry by making sure we make the right assessments, use the best technology, and put the best hands on. We have a strong commitment to our environment and communities. Our engagement goes through the full value chain and we actively help our customers achieve their targets in light weighting and performance. We are a full-service supplier that invests in R&D, in addition to investing in the entire process from product development to mass production; we support and promote a circular economy that contributes to the reduction of CO2 emissions.
Aluminum Semi Permanent Mold Business Unit
We are a reliable partner for the sustainable mobility transformation, which requires not only mastering our processes, but also investing in the best technology, developing the right skills, and potentiating the best in our talented people. Bocar group approaches innovation by taking into consideration our customer needs and the relentlessly seeking for better ways to do everything we do. To listen carefully and provide the right solutions. We participate actively in the technology transformation of the industry by making sure we make the right assessments, use the best technology, and put the best hands on. We have a strong commitment to our environment and communities. Our engagement goes through the full value chain and we actively help our customers achieve their targets in light weighting and performance. We are a full-service supplier that invests in R&D, in addition to investing in the entire process from product development to mass production; we support and promote a circular economy that contributes to the reduction of CO2 emissions.
Plastics Business Unit
We are a reliable partner for the sustainable mobility transformation, which requires not only mastering our processes, but also investing in the best technology, developing the right skills, and potentiating the best in our talented people. Bocar group approaches innovation by taking into consideration our customer needs and the relentlessly seeking for better ways to do everything we do. To listen carefully and provide the right solutions. We participate actively in the technology transformation of the industry by making sure we make the right assessments, use the best technology, and put the best hands on. We have a strong commitment to our environment and communities. Our engagement goes through the full value chain and we actively help our customers achieve their targets in light weighting and performance. We are a full-service supplier that invests in R&D, in addition to investing in the entire process from product development to mass production; we support and promote a circular economy that contributes to the reduction of CO2 emissions.
Technology and innovation
We are a reliable partner for the transformation of sustainable mobility. This change requires not only mastering our processes, but also investing in the best technology, developing the appropriate skills and enhancing the talent of our people.
Bocar Group approaches innovation taking into account the needs of our customers and the incessant search for better ways of doing everything we do, listening carefully and offering the appropriate solutions.
We actively participate in the technological transformation of the industry, making sure to carry out the correct evaluations, use the best technology and put the best hands to work.
We are a full-service supplier that invests in R&D, in addition to investing in the entire process from product development to mass production.
-
Heat treatment for structural parts
-
Multi alloy management
-
Squeeze control system
-
Thin wall casting
-
Super vacuum system
-
Lost core casting
-
High thermal performance
-
(MQL) Minimum Quantity Lubrication Machining
-
High production multi spindles machining
-
Core 3D printing
-
Inorganic sands
-
Low pressure
-
Subframes welding and assembly
-
Multi injection materials